PROBE

Probes are used to supply necessary gases from terminal units to the patient or medical equipments via hose connections or by direct connection to the equipment.

Probes are gas specific and made of stainless steel if required by the standards. They are manufactured in compliance with BS 5682:1992, DIN 13260, NFS 90-116, UN 737 Italian and American standards.

VACUUM JAR

Vacuum Jar is manufactured from hygienic material by a plastic injection process 
It may be sterilized at 120°C in autoclave. It automatically closes on overflow due to float available on its cover. 
There are various types of jars according to the capacity such as:
a-) 0.5, 0.85, 1.25 liter direct fitted to Vacuum regulator.
b-) Wail type 2 liter jar fixed to the wall or rail complete with overflow trap and suction tubes. 
c-) Portable suction trolleys are having single or double 5 liter suction jar complete, complete with overflow trap, suction tubes and probe.

Rail system is used for hanging or attaching different medical instruments to the wall rail.

The rail of 30x10mm cross section can be attached directly to the wall or on a bed head unit. The rail is made of aluminium and includes connections for potential equalization.

ACCESSORY BASKET

It is made of nickel-plated steel wires and mounted on the rail provided by Intensive care units. It is can slide up & down. It can also be painted by RAL 9016 electrostatic powder paint.

EQUIPMENTS RAIL

Rail system is used for hanging or attaching different medical instruments to the wall rail.

The rail of 30x10mm cross section can be attached directly to the wall or on a bed head unit. The rail is made of aluminium and includes connections for potential equalization.

 

MONITOR STAND

It is made of anodized and extruded aluminum profiles and capable to carry 50 kg. Load. It can be mounted on accessory rail or directly on the wall.

When mounting on a rail, a connection support must be added. The body of the stands can slide up and down on the rail and move sideways due to a special adjustment table.

VACUUM MOBILE UNIT

Stainless steel or powder coated two kinds.Vacuum brake system has the wheel of his car.

3 Piece Stainless Steel Vacuum 2lt car on a piece of vacuum jars are vacuum regulator.

Electrostatic powder painted two different models of cars are produced in vacuum.In this vacuum, the second one 5 liter car.jars are vacuum.Mobile vacuum system needs to be used in the place.

fabrikamedikar

Medikar Hastane ve Tıbbi Sis. Yapı Taah. Tes. İmal. San. Tic. Ltd. Şti.

Address: Varlık Mahallesi,Beypazarı Caddesi No:21  ANKARA/Turkey

E-Mail: info@medikar.com Tel: +90 (312) 341 10 41 Fax: +90 (312) 341 10 42

Factory Address: Mersin Tarsus Organize Sanayi Bölgesi, Cumhuriyet Bulvarı No:13 MERSIN/Turkey

E-Mail: info@medikar.com

Tel: +90 (324) 645 40 41 - +90 (324) 645 40 42